Kuang Lung-288 Super Flex Shaft - Purple 3/32"

KL- 288 Slim Type Super-Flex Shaft - 3/32"

• Slim type
• Snap lock - No extra tools needed
• Specially designed with extra flexibility, high precision and accuracy
• Easy/Quick "S"ecure and "R"elease mechanism
• Convenient twist or component construction allows easy and quick hand piece, coupler, inner shaft, outer sleeve replacement

Instructions:

1. Turn off tool and disconnect from power supply
2. Holding down the shaft lock button, screw the square drive adapter onto the motor shaft and tighten firmly
3. Screw the Flex Shaft onto the power housing, making sure the square end of shaft (inner cable) slides down into the square hole in the square drive adapter
4. Your hand piece is now ready to insert your bit with the new "SNAP LOCK" mechanism

1. Turn the red-dot • on the hand piece to "R" for bit insertion or removal
2. Turn the red-dot • on the hand piece to "S" position. Be sure to turn enough to "SNAP LOCK" the collet

5. Before you turn on the tool, make sure the red-dot • is in "S" position and the bit is secured. DO NOT start super-flex shaft when red-dot • is in "R" position or without a bit. Otherwise this will cause damage to the flex shaft